The adhesive materials are tape, transparent paper, and kraft paper. Weighing the pros and cons, the use of kraft paper is more common, cutting the paper fiber straight and forward and backward of the last, the length slightly exceeds the length of the last, the width slightly exceeds the width of the center line of the face. You can lick the paper, you don't need to be skilled, otherwise you can serve it, but it is difficult to expose and easy to be distorted. After smashing the paper, the paper is flattened, and the paper and the kneading surface are separately glued and dried.
1. When the full-stick sticker method is used for the asymmetry of the face (the asymmetry of the inner and outer patterns), it must be attached to the whole. First cut 2/3 according to the center line of the sticker, then align the center line of the sticker with the heart line at the front end of the shoe last, and affix it to the face. Make two or three tiny cuts in the most concave place of the cockroach to make the face flat.
2. The semi-faceted sticker method is used for the symmetrical styling inside and outside of the upper. The method: cut a piece of paper slightly longer than the last, align the outer side of the last, and make three cuts in the most concave part of the crotch, and then take a small piece of stickers to fill the three notches.
3. Full-faced with the empty waist file sticker method for the sandals to help the face, generally according to the front and the rear wing length to cut two pieces of paper, according to the size of the help surface slightly more than some stickers, such as deep mouth Cut the mouth in the most concave place, the method is the same as above, if you are shallow, you don't have to cut the mouth.
4. The empty empty and full waist sticker method is used for female sandals to help face, cut a piece of paper slightly shorter than the length of 1cm, and center the center line of the paper to the inside of the last, The outer ring, if the head is empty, can be left 1cm, and the lower part of the mouth can be cut off to make the sticker more compliant.
